Gallery - 1983 Rosewood-topped Reissue Passive Pro

1983 Rosewood-topped Reissue Passive Pro

One of the great things about a brand like Wal is that a mix of two inquiring minds and a laissez faire attitude to “standard models” throws up a whole load of interesting basses to scratch your head about. One such bass cropped up recently in an online discussion on Basschat. The then owner, Gary Mackay, offered up his 1983 reissue Passive Pro bass as an unusual example of the model. The history of the Pro Series deserves, perhaps, a little unpacking as its history isn’t necessarily straightforward.

The original Pro Series was the first standard model of Wal bass and was offered between 1978 and 1981. They offered four options – single or dual pickups and active or passive circuitry – solid ash, paddle headstocks, contoured bodies and large black scratchplates. These basses were superseded with the introduction of the Mark 1 Custom in 1981. The Pro Bass was no longer offered for sale.

However, realising that their new Custom Series were effectively luxury models Electric Wood saw that there was a space in the market for a budget Wal. But how to cut costs without cutting corners? The Reissue Pros feature a more or less standard laminates Wal neck but a slab, solid ash body and a single passive pickup (either in the bridge or neck position – the position changed over time) controlled via a small, tear drop-shaped control plate.

As a little extra bling they were often finished with a fairly plain flamed or birdseye maple veneer (and a sunburst finish to hide the veneer’s edge). Gary’s Reissue Pro, however, if the only one I’ve ever seen with a rather tasty, pale rosewood top and clear varnish. All in all a rather classy set of appointments for a supposedly “budget” bass.

Bassist magazine feature, January 2000 - "My bass(es) are... Four Wals"

My Basses are...   Four Wals

Steve Weston wanted a Wal. Then he wanted another. And another. Then? Well, we'll let him tell you...

I will never forget the first time I heard a Wal, it was in 1983 and being very ably played by Colin Bass of Camel. I'd had a number of basses over the years, Rickenbacker, Fender, Ibanez etc, but had never quite managed to capture that elusive sound that I wanted from any of them. Anyway there I was watching Camel and I was suddenly being blown away by this amazing bass, loud in the mix without being overpowering, driving, clear and very tight. I decided then and there that I had to have one.

Anyway as it turned out, deciding I had to have one was the easy bit. It actually took me two years of saving, gigging on reduced curry and beer intake (slightly) before I had enough cash to realise my dream, a 1984 Custom 4 string purchased from a reluctant seller in London.

The bass as it was then had a Mahogany body, Electric Wood standard, with Walnut facings and an ebony fretless fingerboard, great looks, and yes, it had that great fretless Wal sound which suited me exactly at the time due to the material we were playing. I later had luthier Pete the Fish at Electric Wood make me a fretted neck so I had some opportunity to change style from time to time. In one form or the other it was my only bass for the next 6/7 years and it never let me down once.

Wal MB4 midi bass

The Wal MB4 MIDI Bass.

The Wal MB4 midi-bass was a relatively short lived collaboration between Electric Wood and Australian bass player/designer Steve Chick.  The system allowed a bass player to control a midi synthesizer directly from the bass with both accurate note tracking with immediate sounding notes.  A common problem for early guitar and bass to midi converters was the so-called "midi-delay" – the almost imperceptible (but still noticeable and distracting) delay between hitting a note and the note sounding. This was down to the physics of the leading technology used at the time for sensing the notes.

The main sensor on most synth controllers at the time was the so called "hex pickup". These thin pickups could usually be seen squeezed in between the bridge pickup and the bridge itself - indeed, kits were available allowing you to stick a hex pickup on your own favourite guitar. The triggering delay was caused by the time taken for the midi hex pick-up to sense the note being played. All the information about that note was conveyed to the midi converter by the hex pickup and therein lay its weakness. To sense the pitch of the note, the pickup needed to listen to a few full vibrations of the string. This wasn't such a problem when shredding away at the top of a guitar neck. The time taken for the string to vibrate a couple of times was minimal and imperceptible. 

Video Demos

Just what do all those knobs do?

We Wal fans all know just how versatile the Wal bass is - largely down to the visionary design of the active electronics. There are so few other basses that have ever used the type of filters which a Wal Custom bass uses. So if there is a downside to the versatility upside of the Wal tone circuit then it is that the way in which they work may not be familiar. They aren't immediately intuitive to all.

The Wal Custom tone controls are described in more detail in the page on this blog that covers those models. But the drafting of those instructions aren't exactly user friendly. However, the beauty of the internet is that there is a wealth of info out there, particularly on YouTube. 

Here are a few videos of Wals in action. Enjoy.

First up is a video by Jaymi Millard, a serial Wal user and serial groovy bass reviewer on his YouTube channel. Here he is reviewing a 1985 Mk I four string...

My basses: 1985 Wal Custom 4-string bass - W2601

I am lucky enough to have what I consider to be a small but perfectly formed collection of bass guitars. First of all I'm the owner of two bass guitars from one of Britain's most respected builders... Wal Basses by Electric Wood.  These are a beautiful red "Pro series" bass from 1979 and a schedua topped  "Custom series" bass from 1985.  I also have another British-built bass, a custom built acoustic bass made by the luthier, Tony Revell, from the south of Wales. Alongside that I've got a couple of other lovely basses, an old Aria SB700 (my first ever bass - awww!) and a customised Jazz bass copy with an interesting story to tell. First up is my main bass for over twenty years, my 1985 Mk I Custom series bass.

 

1985 Wal Custom 4-string bass - W2601: